Archive for September 2015

ဝင္းဒုိးတင္တဲ့အခါမွာ Windows cannot be installed to this disk ဆိုတဲ့ error ေျဖရွင္းနည္း




If your HD passes the suggested HD Diagnostic CD scan, then:

Unplug all other HD's and peripherals,

Boot into BIOS setup, reset to defaults, save changes. If an EFI BIOS you'll need to decide if you want UEFI BIOS vs. Legacy BIOS. If UEFI follow these special steps for Install, otherwise enable Legacy BIOS or Compatibility Support Module to proceed with normal install:

Set DVD drive first to boot, HD second, set SATA controller to AHCI, Save changes and Exit.

Then boot into Windows 7 installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here. I would use a fresh ISO written with tool in Step 2 as yours is in question.

At first installer screen Press Shift + F10, or enter System Recovery Options to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.

After install you can adjust partition size or Create new partitions for data, etc. in Disk Mgmt. You are creating the partition here for the purpose of wiping the HD and marking Active which overcomes certain install failures.

Sunday, September 13, 2015
Posted by Unknown

အခ်ဳိ႔ ေဆာ့ဝဲလ္ေတြ ဖြင့္တဲ့အခါမွာ Publisher Could Not Be Verified မေတာင္းေအာင္ ေျဖရွင္းနည္း

Windows: Disable “Publisher Could Not Be Verified” Messages
Disable the warning message that says “The Publisher Could Not Be Verified” when you run certain files in Microsoft Windows.

Note: This tutorial is only valid for version of Windows that contain the Group Policy Editor such as Windows 8.1 Professional.

1.Hold the Windows Key, then press “R” to bring up the Run dialog box.
Type “gpedit.msc“, then select “OK“.
2.Go to “User Configuration” > “Administrative Templates” > “Windows Components” > “Attachment Manager“.
3.Open the “Inclusion list for moderate risk file types” setting.
4.Set the policy to “Enabled“, then add “*.exe;” or whatever the file extension you are using to the “Specify high risk extensions” box.
Posted by Unknown
Powered by Blogger.

- Copyright © pw - Metrominimalist - Powered by Blogger - Designed by Johanes Djogan -